Back to JOURNALS
On this page
Join Editorial Board
CREATECOM TECHNOLOGIES welcomes researchers, academicians, scientists, faculties, industry experts and all competent professionals to join as reviewers/advisors in editorial board of our journals. Having such an eminent professional as you as member of the editorial boards is a matter of prestige for us as well as beneficial for your academic profile. In addition to that you stay tuned and in touch with the peers so that you never miss the latest happenings in the field of academics and research. The benefits of being a member of Editorial Board do not limit to the above-mentioned advantages but also extend to partial fee waiver option against credentials gained by reviewing papers.
Moreover, straight after your joining you are eligible to publish first paper in selected journals with 100 percent waiver of article processing charges (APC).
Guidelines For Reviewers
Peer review plays a role of prime importance in scholarly publication and it is the important factor among various ones which makes an article credible, authentic and valuable. To help peers understanding the review process and to adopt good reviewing practices, here are some key points to take care of.
On Being Asked To Review
– Does the article you are being asked to review truly match your expertise?
The Editor who has approached you may not know your work intimately, and may only be aware of your work in a broader context. Only accept an invitation if you are competent to review the article.
– Do you have time to review the paper?
Reviewing an article can be quite time consuming. The time taken to review can vary greatly between disciplines and of course on article type, but on average, an article will take about many hours to review properly. Will you have sufficient time before the deadline stipulated in the invitation to conduct a thorough review? If you cannot conduct the review let the editor know immediately, and if possible advise the editor of alternative reviewers.
– Are there any potential conflicts of interest?
A conflict of interest will not necessarily eliminate you from reviewing an article, but full disclosure to the editor will allow them to make an informed decision. For example; if you work in the same department or institute as one of the authors; if you have worked on a paper previously with an author; or you have a professional or financial connection to the article. These should all be listed when responding to the editor’s invitation for review.
Conducting the Review
Reviewing needs to be conducted confidentially, the article you have been asked to review should not be disclosed to a third party. If you wish to elicit an opinion from colleagues or students regarding the article you should let the editor know beforehand. Most editors welcome additional comments, but whoever else is involved will also need to keep the review process confidential.
You should not attempt to contact the author.
Be aware when you submit your review that any recommendations you make will contribute to the final decision made by the editor.
Depending upon the journal, you will be asked to evaluate the article on a number of criteria. Some journals provide detailed guidance others do not, but normally you would be expected to evaluate the article according to the following:
Is the article sufficiently novel and interesting to warrant publication? Does it add to the pile of knowledge? Does the article adhere to the journal’s standards? Is the research question an important one? In order to determine its originality and appropriateness for the journal, it might be helpful to think of the research in terms of what percentile it is in? Is it in the top 25% of papers in this field? You might wish to do a quick literature search using tools such as Scopus to see if there are any reviews of the area. If the research has been covered previously, pass on references of those works to the editor.
Is the article clearly laid out? Are all the key elements (where relevant) present: abstract, introduction, methodology, results, conclusions? Consider each element in turn:
Title: Does it clearly describe the article?
Abstract: Does it reflect the content of the article?
Where graphical abstracts and/or highlights are included, please check the content and if possible make suggestions for improvements. Follow these links for more information on External link graphical abstracts and External link highlights.
- Introduction: Does it describe what the author hoped to achieve accurately, and clearly state the problem being investigated? Normally, the introduction should summarize relevant research to provide context, and explain what other authors’ findings, if any, are being challenged or extended. It should describe the experiment, the hypothesis(es) and the general experimental design or method.
- Method: Does the author accurately explain how the data was collected? Is the design suitable for answering the question posed? Is there sufficient information present for you to replicate the research? Does the article identify the procedures followed? Are these ordered in a meaningful way? If the methods are new, are they explained in detail? Was the sampling appropriate? Have the equipment and materials been adequately described? Does the article make it clear what type of data was recorded; has the author been precise in describing measurements?
- Results:This is where the author/s should explain in words what he/she discovered in the research. It should be clearly laid out and in a logical sequence. You will need to consider if the appropriate analysis has been conducted. Are the statistics correct? If you are not comfortable with statistics, please advise the editor when you submit your report. Interpretation of results should not be included in this section.
- Conclusion/Discussion:Are the claims in this section supported by the results, do they seem reasonable? Have the authors indicated how the results relate to expectations and to earlier research? Does the article support or contradict previous theories? Does the conclusion explain how the research has moved the body of scientific knowledge forward?
- Language:If an article is poorly written due to grammatical errors, while it may make it more difficult to understand the science, you do not need to correct the English. You should bring this to the attention of the editor, however.
Finally, on balance, when considering the whole article, do the figures and tables inform the reader, are they an important part of the story? Do the figures describe the data accurately? Are they consistent, e.g. bars in charts are the same width, the scales on the axis are logical.
– Previous Research
If the article builds upon previous research does it reference that work appropriately? Are there any important works that have been omitted? Are the references accurate?
– Ethical Issues
- Plagiarism: If you suspect that an article is a substantial copy of another work, please let the editor know, citing the previous work in as much detail as possible
- Fraud: It is very difficult to detect the determined fraudster, but if you suspect the results in an article to be untrue, discuss it with the editor
Communicating Your Report to the Editor
- Once you have completed your evaluation of the article the next step is to write up your report. As a courtesy, let the editor know if it looks like you might miss your deadline.
- IRJEAS requests that you complete the review report form, checking various aspects of the paper, others will request an overview of your remarks. Either way, it is helpful to provide a quick summary of the article at the beginning of your report. This serves the dual purpose of reminding the editor of the details of the report and also reassuring the author and editor that you have understood the article.
- The report should contain the key elements of your review, addressing the points outlined in the preceding section. Commentary should be courteous and constructive, and should not include any personal remarks or personal details including your name.
- Providing insight into any deficiencies is important. You should explain and support your judgment so that both editors and authors are able to fully understand the reasoning behind your comments. You should indicate whether your comments are your own opinion or are reflected by the data.
- When you make a recommendation regarding an article, it is worth considering the categories the editor most likely uses for classifying the article.
a) Rejected due to poor quality, or out of scope
b) Accept without revision
c) Accept but needs revision (either major or minor)
In the latter case, clearly identify what revision is required, and indicate to the editor whether or not you would be happy to review the revised article.
Peer Review Process
Peer review is the evaluation of work submitted by single or multiple people of same or similar competence to the producers of the work (peers). The review process at CREATECOM TECHNOLOGIES journals is carried out by corresponding peers who follow publication ethics and common good practices of article reviewing. Createcom Technologies relies on qualified members of a profession/trade/major/stream within the relevant field. Peer review practices and methods are adopted in order to maintain standards of quality, verifying authenticity of furnished data and hence making an article citable and credible.
All papers received are assigned a unique id and are submitted to a peer review process. The Editors may discard some manuscripts from the outright due to very low quality or in case of conflict with any of journal’s policies.
At CREATECOM TECHNOLOGIES, for all of its journals we have adopted DOUBLE BLIND Review system so as there is no influence of authors as well as reviewers on the review process and it remains completely honest and no manipulation is possible.
Taking in consideration its subjects (Aim & Scope of Journal) and plagiarism detection, the papers passing this preliminary screening will be remitted to a panel of referees involved in those research areas. Each paper will be reviewed by at least two referees.
After evaluation, the referees will produce reports about the works reviewed, by which the papers can be
a) Accepted with modifications or corrections;
b) Approved as they are or
c) Rejected from the start. In case that the papers proposed are accepted but in need of modifications or corrections, the Editors will return the manuscripts to the authors, together with the referee’s reports and all the suggestions, recommendations and comments therein.
To secure impartiality during the review process, all papers, as remitted to the referees, will be anonymous. Moreover, the referees’ identities will not be known, neither by the rest of the evaluation panel, nor by the authors.
The final decision concerning the publication of papers belongs to the Editorial Board, having the referees a consultative role.